1×1 Mechanical Optic Switch
The 1×1 Mechanical optical switch is connected to the optical path by connecting or blocking the optical signal, the product is controlling by electrical signal to switch the optical path.
Description
Applications
| Application Scenarios |
| Optical Signal Routing |
| Optical Network Protection/Restoration |
| Configurable Optical Add/Drop |
| Transmitter and Receiver Protection |
Technical Index
| Parameters | FY-FSW-1×1 | ||
| Wavelength Range | nm | 850±40/1300±40 | 1260～1650 |
| Operating Wavelength | nm | 850/1300 | 1310/1490/1550/1625/1650 |
| Insertion Loss | dB | Typ:0.5 Max:0.8 | Typ:0.5 Max:0.8 |
| Return Loss | dB | MM≥30 SM≥50 | |
| Crosstalk | dB | MM≥35 SM≥55 | |
| PDL | dB | ≤0.05 | |
| WDL | dB | ≤0.25 | |
| TDL | dB | ≤0.25 | |
| Repeatability | dB | ≤±0.02 | |
| Power Supply | V | 3.0 or 5.0 | |
| Lifetime | Cycles | ≥10⁷ | |
| Switch Time | ms | ≤8 | |
| Transmission Power | mW | ≤500 | |
| Operating Temperature | ℃ | -20～+70 or -45～+85 | |
| Storage Temperature | ℃ | -40～+85 | |
| Weight | g | 16 | |
| Dimension | mm | (L)27.0×(W)12.0×(H)8.2 | |
Pin Definition
| Parameters | Pins | Electric Drive | Status Sensor | ||||||
| 1×1 | Optical Path | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 |
| Non-latching | Light Close | — | — | — | — | Close | Open | Open | Close |
| P1-P2 | V+ | — | — | GND | Open | Close | Close | Open | |
| Latching | Light Close | — | — | GND | V+ | Close | Open | Open | Close |
| P1-P2 | V+ | GND | — | — | Open | Close | Close | Open | |
Route States
| Status One | Status Two |
 |
 |
Ordering Information
Model: FY-FSW-1×1-x-xx-x-x-x-xx-x-xx
| Type | Wavelength | Voltage | Control Model | Fiber Type | Fiber Diameter | Fiber Length | Connector |
| 1×1 | 85=850nm 13=1310nm 15=1550nm 13/15=1310/1550nm X=Others |
3=3V 5=5V |
L=Latching N=Non-Latching |
5=50/125 6=62.5/125 9=9/125 X=Others |
25=250um 90=900um 20=2.0mm 30=3.0mm X=Others |
1=1m 2=1.5m X=Others |
00=none LP=LC/UPC LA=LC/APC SP=SC/UPC SA=SC/APC FP=FC/UPC FA=FC/APC X=Customized |
