1×2 Mechanical Optic Switch

1×2 Mechanical Optical Switch is used to turn on, turn off and switch optical signal. The 1×2 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future.

Category:

Description

Features & Applications

Features Applications
Unmatched Low Cost Optical Network
Low Insertion loss Protection/Restoration
High Channel Isolation Optical Singnal Routing
High Stability, High Reliability Configurable Optical Add/Drop
Epoxy-free on Optical Path Transmitter and receiver protection
Latching and Non-latching Network Test System

Technical Index

Parameters FY-FSW-1×2
Wavelength Range nm 850±40 / 1300±40 1260~1650
Operating Wavelength nm 850/1300 1310/1490/1550/1625/1650
Insertion Loss dB Typ:0.8 Max:1.2 Typ:0.5 Max:1.0
Return Loss dB MM≥30 SM≥50
Crosstalk dB MM≥35 SM≥55
PDL dB ≤0.05
WDL dB ≤0.25
TDL dB ≤0.25
Repeatability dB ≤±0.02
Power Supply V 3.0 or 5.0
Life Time Cycles ≥10⁷
Switch Time ms ≤8
Transmission Power mW ≤500
Operating Temperature -20~+80
Storage Temperature -40~+85
Weight g 16
Dimension mm (L)27×(W)12.0×(H)8.2

Pin Definition

Type Pin/Channel Electric Drive Status Sensor
1 5 6 10 2-3 3-4 7-8 8-9
Latching P1-P2 GND V+ Close Open Open Close
P1-P3 V+ GND Open Close Close Open
Non-latching P1-P2 Close Open Open Close
P1-P3 V+ GND Open Close Close Open

Route States
State A State B

 

Ordering Information

Model: FY-FSW-1×2-x-xx-x-x-x-xx-x-xx

Mode Wavelength Voltage Control Model Fiber Type Fiber Diameter Fiber Length Connector
S=SM
M=MM
85=850nm
13=1310nm
15=1550nm
13/15=1310/1550nm
X=Others
3=3V
5=5V
L=Latching
N=Non-Latching
5=50/125
6=62.5/125
9=9/125
X=Others
25=250um
90=900um
20=2.0mm
30=3.0mm
X=Others
1=1m
2=1.5m
X=Others
00=none
LP=LC/UPC
LA=LC/APC
SP=SC/UPC
SA=SC/APC
FP=FC/UPC
FA=FC/APC
X=Customized