1×4 Mechanical Optical Switch
1×4 Opto-Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting 1 incoming optical signals into 4 output fibers. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedentedhighstabilityas wellas unmatchedlowcost.
Application
Description
Application
Instrumentation, testing, and measurement
Metropolitan Area Network
Network protection and restoration
R&D in Laboratory
Technical index
| 1×4 T Type Switch | Unit | Typical |
| Operation Wavelength | nm | 850nm or 1310/1490/1550nm |
| Insertion Loss 1 | dB | <0.8 |
| Wavelength Dependent Loss | dB | <0.2 |
| Polarization Dependent Loss | dB | <0.2 |
| Return Loss | dB | SM: >55 MM:>40 |
| Cross Talk | dB | SM: >55 MM:>40 |
| Switching Time | ms | Typical: 4 Max:10 |
| Repeatability | dB | <±0.02 |
| Durability | Cycles | >10 Million |
| Switching Type | Latching / Non-Latching | |
| Optical Power Handling | mW | <500mW |
| Operating Voltage | VDC | 3V or 5V |
| Operating Temperature | ℃ | -5~+70 |
| Storage Temperature | ℃ | -40~+85 |
| Fiber Type | / | SM/MM Fiber |
| Package Dimension | mm | 27L x 23W x 8.2H |
Pins
| Type | State | Optical Route | Electric Drive | Status Sensor | ||||||||||||||
| Relay 1 (Pin) | Relay 2 (Pin) | Relay 1 (Pin) | Relay 2 (Pin) | |||||||||||||||
| 1 | 5 | 6 | 10 | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 | 2-3 | 3-4 | 7-8 | 8-9 | |||
| 1×4 | A | COM-P1 Black | – | – | GND | V+ | V+ | GND | – | – | close | open | open | close | open | close | clsoe | open |
| Latching | B | COM-P2 Red | V+ | GND | – | – | – | – | GND | V+ | open | close | close | open | close | open | open | close |
| C | COM-P3 Blue | – | – | GND | V+ | – | – | GND | V+ | close | open | open | close | close | open | open | close | |
| D | COM-P4 White | V+ | GND | – | – | V+ | GND | – | – | open | close | close | open | open | close | close | open | |
| Non-Latching | A | COM-P1 Black | – | – | – | – | V+ | – | – | GND | close | open | open | close | open | close | close | open |
| B | COM-P2 Red | V+ | – | – | GND | – | – | – | – | open | close | close | open | close | open | open | close | |
| C | COM-P3 Blue | – | – | – | – | – | – | – | – | close | open | open | close | close | open | open | close | |
| D | COM-P4 White | V+ | – | – | GND | V+ | – | – | GND | open | close | close | open | open | close | close | open | |
Route States
Ordering Information
| Type | Wavelength | Control Model | Volatage | Fiber Type | Fiber Diameter | Fiber Length | Connector |
| 14=1×4 | 1=1060nm
2=850nm 3=1310 4=1550 35=1310&1550 345=1310/1490/1550nm B=1260~1620 X=Special |
L=Latching
N=Non- Latching |
3=3V
5=5V |
1=SMF-28
X=Special |
25=250um
90=900um X=Others |
1=0.5m
2=1m 3=1.5m X=Other |
