D1×2 Mechanical Optical Switch
Dual 1×2 Opto-Mechanical Bi-directional Fiber Optic Switch combine 2unit 1×2 Optical switch. Each 1×2 Optical Switch connects optical channels by redirecting 1 incoming optical signals into 2 output fibers. This is achieved using a opto-mechanical configuration and activated via an electrical control signal. It is designed for use in optical fiber communication networks and measurement instruments.
Description
| Features | Applications |
| Unmatched Low Cost | Optical Network |
| Low Insertion loss | Protection/Restoration |
| High Channel Isolation | Optical Singnal Routing |
| High Stability, High Reliability | Configurable Optical Add/Drop |
| Epoxy-free on Optical Path | Transmitter and receiver protection |
| Latching and Non-latching | Network Test System |
Performance Specifications
| Model | Unit | FY-D1x2 | |
| Operatingwavelength | nm | 850±40/1300±40 | 1260～1620 |
| wavelength | nm | 850&1300 | 1310&1550 |
| Insertion loss | dB | Typ:1.0 Max:1.5 | |
| Return loss | dB | MM≥30 SM≥50 | |
| Cross talk | dB | MM≥35 SM≥55 | |
| PDL | dB | ≤0.05 | |
| WDL | dB | ≤0.25 | |
| TDL | dB | ≤0.25 | |
| Repeatability | dB | ≤±0.02 | |
| Voltage | v | 3.0 or 5.0±0.5 | |
| Operating life | Time | ≥10^7 | |
| Switch time | ms | ≤8 | |
| Power handling | mW | ≤500 | |
| Operating temperature | ℃ | -20～+70 | |
| Storage temperature | ℃ | -40～+85 | |
| Dimension | mm | (L)27.0×(W)12×(H)8.2 | |
| Note: 1 Within operating temperature and SOP. 2 Excluding Connectors. | |||
Pin
| Type | Optical Path | Electric Drive | Status Sensor | ||||||
| D1×2 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 | |
| Latching | P1-P3′、P2-P4′ | — | — | GND | V＋ | Close | Open | Open | Close |
| P1-P1′、P2-P2′ | V＋ | GND | — | — | Open | Close | Close | Open | |
| Non-Latching | P1-P3′、P2-P4′ | — | — | — | — | Close | Open | Open | Close |
| P1-P1′、P2-P2′ | V＋ | — | — | GND | Open | Close | Close | Open | |
Route States
Ordering Information
FY-D1x2-
| Mode | Wavelength | Voltage Type | Control Model | Fiber Type | Fiber Diameter | Fiber Length | Connector |
| S=SM
M=MM |
85=850nm
13/15=1310/1550nm X=Others |
3=3V
5=5V |
L=Latching
N=Non- Latching |
5=50/125
6=62.5/125 9=9/125 X=Others |
25=250um
90=900um 20=2.0mm 30=3.0mm X=Others |
1=1m
2=1.5m X=Others |
00=none LP=LC/UPC LA=LC/APC SP=SC/UPC SA=SC/APC FP=FC/UPC FA=FC/APC X=Customized |
