MEMS VOA

Description

Optic Specifications

 

Parameter	Specification	Unit	Note
Wavelength Range	850 / 1064	nm
	1310	nm	O Band
	1530~1570	nm	C band
	1570~1610	nm	L band
Attenuation Type	Bright    or Dark	–
Attenuation Range	≥30	dB	For Single Mode
Blocking state Attenuation	≥40	dB	Dark Type
Insertion Loss	≤0.7	dB	For Single Mode
Attenuation Resolution	Continuous	–
Wavelength Dependent Loss	≤0.3	dB	@<0 dB Att.
	≤1.5    Typical 0.8	dB	@<20 dB Att.
Polarization Dependent Loss	0.1	dB	@<0 dB Att.
	0.5	dB	@<20 dB Att.
Temperature Dependent Loss	≤0.7	dB	@<0 dB Att. compare with RT
	≤1.5	dB	@<20 dB Att. compare with RT
Return loss	≥45	dB	For Single Mode
Response time	≤2	ms	10-90%optical power
Optical Power Handing	500	mW
Driving Voltage	6.5 or 15	V
Power Consumption	≤2	mW
Operation Temperature	0~70	℃
Storage Temperature	-40~85	℃
Dimension	5.5×17	mm

Notes: 1. Specified without connectors.    2. Add an additional  0.2dB loss per connector.

OPERATION/STORAGE TEMPERATURE/HUMIDITY

Parameters	Specification	Unit
Operation Temperature	-5~+65	℃
Storage Temperature	-40~+85	℃
Operation Humidity	5~95	%RH
Storage Humidity	5~95	%RH

 

PIGTAIL AND CONNECTOR

 

Parameters	Specification	Unit
Fiber Type	SMF, G657
Pigtail Type	250um, Bare fiber
Pigtail Length	100±10	cm
Connector	NA

Dimension

Electrical Connector Configuration

Ordering information

 

MEVOA	–	×	×	××	×	××	×	–	×	×
		wavelength	At t. Type	Drive Vo ltage	Fiber Type	P igtail Length	P igtail Type		Input	output
		1=850nm   2=1064nm 3=1310nm 4=1550nm X=Customized	B=Bright D=Dark	05=5V 15=15	1=SMF-28 2=HI1060 3=MM50/125 4=MM60/125 X=Customized	05=0.5m 10=1.0m	B=Bare Fiber L=900um Loose Tube		0=None 1=FC/UPC 2=FC/APC 3=SC/UPC 4=SC/APC 5=LC/UPC 6=LC/APC	0=None 1=FC/UPC 2=FC/APC 3=SC/UPC 4=SC/APC 5=LC/UPC 6=LC/APC