Showing 17–32 of 86 results
2x2B Opto-Mechanical Bi-directional Fiber Optic Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The 2x2B mechanical Fiber Optical Switch are true switching solution for optical networking applications, mainly used to realize optical path protection.
coarse wavelength division multiplexer takes advantage of thin film coating technology. And the devices combine and separate the optical signal at different wavelength.CWDM devices are mainly used in passive wavelength division multiplexing system module products, which can Mux, Demux or add-drop multiplexing different optical signals, meet the requirements of providing different rates of transmission channels transparent to the protocol on a single optical fiber, such as Ethernet, ATM, POS, SDH, etc., and are widely used in telecommunications, radio and television, enterprise network, campus network and other fields.
The 100Ghz 1×2 (3port) DWDM OADM Multiplexer device Optical Add Drop Component is thin film filter technology and metal bonding micro optics packaging for improved performance, such as wide channel bandwidth, flexible channel configuration, lower insertion loss and higher thermal stability, with a competitive cost structure.it can be used in high-power applications in DWDM systems.
3 Port FWDM is based on thin film filter technology, it has a smooth channel bandwidth and high isolation, low insertion loss and high environmental stability and reliability etc, very suitable for use in optical amplifier, CATV and FTTH applications.
Polarization Insensitive Optical Circulator It’s a compact, highperformance components, with high isolation, low insertion loss, low PDL, high stability and reliability. It is widely used in combination with fiber gratings and other reflective components in DWDM systems, wavelength add/drop, high speed systems, bi-direction communication systems, dispersion compensation, EDFA application and optical time domain reflectometer (OTDR) measurements.
Micro-Optics WDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
The 3-Port 1060nm Circulator is a specialized optical component designed for high-performance applications requiring precise signal routing in the 1055-1065nm wavelength range. Featuring an epoxy-free optical path for enhanced reliability, it delivers typical insertion loss of 1.8 dB and high isolation up to 25 dB. With low polarization-dependent loss (≤0.2 dB) and high return loss (≥50 dB), this circulator is ideal for optical amplifiers, pump laser sources, fiber optic sensors, and test instrumentation. Compatible with Corning HI 1060 fiber and housed in a compact L34×W8.4×H8.4mm package, it offers flexible configuration options with bare fiber or 900µm loose tube, multiple connector types, and various fiber lengths.
The 3-Port 850nm/980nm Circulator is a cost-effective and reliable optical component designed for applications requiring low insertion loss and stable signal routing. Operating at wavelengths of 850±20 nm and 980±20 nm, it features typical insertion loss of 1.3 dB and high isolation of up to 25 dB. With low polarization-dependent loss (≤0.2 dB) and high return loss (≥50 dB), this circulator ensures efficient performance in optical amplifiers, pump laser sources, fiber optic sensors, and test instrumentation. Available in compact package sizes (Φ5.5×L38 or L50) with bare fiber or 900µm loose tube options, multiple connector types, and various fiber lengths for flexible integration.
This high-density 36-fiber collimator delivers excellent optical performance with low insertion loss and high return loss. It features an epoxy-free optical path, low polarization-dependent loss, and stable operation across a wide wavelength range from 850nm to 1650nm.
Designed for applications including isolators, circulators, WDM systems, and optical sensing, this collimator is available with various lens types, working distances, and connector options to support flexible integration into diverse optical systems.
The 36 Fiber Pigtail is a high-density, reliable fiber optic solution designed for applications requiring low insertion loss, wide bandwidth, and minimal polarization-dependent loss. It features an epoxy-free optical path for enhanced long-term performance and is available in both P and A grades to meet varying system requirements. Compatible with wavelengths from 1250–1650 nm, including 1310 nm and 1550 nm, this pigtail supports standard single-mode fibers such as SMF-28E. It is widely used in isolators, circulators, WDM systems, optical sensing, VR, and fiber optic slip rings. Multiple connector types and fiber lengths are available for flexible integration.
Four-port Polarization Insensitive Optical Circulator is a special type of circulator that has one input (port 1), one output (port 4) and two common ports (port 2&3). The light goes through port 1 to port 2. At port 2, any incoming light is guided to port 3 as output, while all input from port 3 is guided to port 4 as output.Compared to three-port circulator, four-port device has one additional bi-directional port. Hence, it can be used to construct more flexible or more complex optical fiber sub-systems, such as add/drop module, mux/demux module, multi-port bi-directional splitters, WDM optical router, etc.
This 40-Channel 100GHz Athermal AWG (Arrayed Waveguide Grating) module provides high-density wavelength multiplexing and demultiplexing with excellent thermal stability. Operating in the C-band with 100GHz channel spacing, it features low insertion loss, high channel isolation, and reliable performance without requiring external temperature control.
Ideal for DWDM transmission, wavelength routing, and optical add/drop multiplexing applications, the module maintains precise wavelength stability across varying environmental conditions. Its compact design and athermal characteristics ensure consistent operation in demanding network environments. Custom configurations including channel count, fiber type, connector options, and fiber length are available to meet specific system requirements.
The passive 40CH/48CH DWDM dense wavelength division module is a heatless array waveguide grating module (AAWG), which has low loss
The characteristics of high reliability, high integration, etc. are widely used in DWDM dense wavelength division transmission networks.
This 48-Channel 100GHz Athermal AWG (Arrayed Waveguide Grating) module provides high-density wavelength multiplexing and demultiplexing with excellent thermal stability. Designed for operation in the C-band based on the ITU grid, it ensures low insertion loss, high channel isolation, and reliable performance without the need for external temperature control.
Ideal for DWDM transmission, wavelength routing, and optical add/drop multiplexing, the module supports 48 channels with precise wavelength accuracy. Its compact and robust design guarantees consistent operation across a wide range of environmental conditions. Custom configurations including channel count, spectral profile, connector type, and packaging are available to meet specific system requirements.
The 49 Fiber Pigtail is a high-density, high-performance fiber optic component designed for applications demanding low insertion loss, wide bandwidth, and excellent polarization-dependent loss (PDL) performance. Featuring an epoxy-free optical path, it ensures long-term stability and reliability. Available in P Grade and A Grade, the pigtail supports key wavelengths including 1310 nm, 1550 nm, and broad-band 1250–1650 nm, and is compatible with SMF-28e single-mode fiber. It is widely used in isolators, circulators, WDM systems, optical sensing, VR, and fiber optic slip rings. Multiple connector options and customizable fiber lengths enable flexible and seamless integration into diverse optical systems.
Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.
