Showing 1–16 of 31 results
Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.
The 1×1 Mechanical optical switch is connected to the optical path by connecting or blocking the optical signal, the product is controlling by electrical signal to switch the optical path.
1×2 Mechanical Optical Switch is used to turn on, turn off and switch optical signal. The 1×2 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future.
1×4 Opto-Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting 1 incoming optical signals into 4 output fibers. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedentedhighstabilityas wellas unmatchedlowcost.
Application
2×2 Mechanical Optical Switch is not affected by the polarization and wavelength. It supports all wavelength at 850nm and 1260nm~1650nm, and It provides high reliability, low insertion loss, fast switching speed and bi-directional performance. They are widely used for multiplex OADM, cross connectors OXC, system testing and protection.
2x2B Opto-Mechanical Bi-directional Fiber Optic Switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The 2x2B mechanical Fiber Optical Switch are true switching solution for optical networking applications, mainly used to realize optical path protection.
coarse wavelength division multiplexer takes advantage of thin film coating technology. And the devices combine and separate the optical signal at different wavelength.CWDM devices are mainly used in passive wavelength division multiplexing system module products, which can Mux, Demux or add-drop multiplexing different optical signals, meet the requirements of providing different rates of transmission channels transparent to the protocol on a single optical fiber, such as Ethernet, ATM, POS, SDH, etc., and are widely used in telecommunications, radio and television, enterprise network, campus network and other fields.
The 100Ghz 1×2 (3port) DWDM OADM Multiplexer device Optical Add Drop Component is thin film filter technology and metal bonding micro optics packaging for improved performance, such as wide channel bandwidth, flexible channel configuration, lower insertion loss and higher thermal stability, with a competitive cost structure.it can be used in high-power applications in DWDM systems.
3 Port FWDM is based on thin film filter technology, it has a smooth channel bandwidth and high isolation, low insertion loss and high environmental stability and reliability etc, very suitable for use in optical amplifier, CATV and FTTH applications.
Polarization Insensitive Optical Circulator It’s a compact, highperformance components, with high isolation, low insertion loss, low PDL, high stability and reliability. It is widely used in combination with fiber gratings and other reflective components in DWDM systems, wavelength add/drop, high speed systems, bi-direction communication systems, dispersion compensation, EDFA application and optical time domain reflectometer (OTDR) measurements.
Micro-Optics WDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
Four-port Polarization Insensitive Optical Circulator is a special type of circulator that has one input (port 1), one output (port 4) and two common ports (port 2&3). The light goes through port 1 to port 2. At port 2, any incoming light is guided to port 3 as output, while all input from port 3 is guided to port 4 as output.Compared to three-port circulator, four-port device has one additional bi-directional port. Hence, it can be used to construct more flexible or more complex optical fiber sub-systems, such as add/drop module, mux/demux module, multi-port bi-directional splitters, WDM optical router, etc.
The passive 40CH/48CH DWDM dense wavelength division module is a heatless array waveguide grating module (AAWG), which has low loss
The characteristics of high reliability, high integration, etc. are widely used in DWDM dense wavelength division transmission networks.
Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.
Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.
Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path.
